Washing machine - How to replace the ventilator (2)

Si applica a

  • Washing machine

Soluzione

missing alt text

Refer always to your product’s user manual safety information before any repair or maintenance operation. https://www.electrolux.com/support/user-manuals/

missing alt text

WARNING! RISK OF ELECTRIC SHOCK

Before any repair or maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

missing alt textmissing alt text

WARNING! RISK OF INJURY

missing alt text

Always take care when moving appliances. For heavy appliances it's safest for two persons to move it. Always use safety gloves and safety footwear. Wear safety gloves at all times to protect from cuts from sharp edges.

missing alt text

WARNING! RISK OF EYE INJURY

missing alt text

Wear safety glasses if you perform maintenance or repair work involving springs.

missing alt text

WARNING! RISK OF PINCHING

missing alt text

Wear safety glovesif you perform maintenance or repair work involving belts.

missing alt text

WARNING! CHOKING HAZARD

Small parts not for children under 3 years. Keep all small parts and packaging out of reach of children.

Only adults should use or install the product.

Before any maintenance operation, turn off water supply to the appliance. Always empty the appliance of all the water. Any maintenance should be carried out with the appliance standing upright. Residual water could damage electronics if the appliance is placed on any of its sides.

Make sure to use the product only for its designated purpose and verify that it is a compatible part for the intended product.

Do not use or install the product if damaged.

Please note that self-repair or nonprofessional repair can have safety consequences if not done properly and might void the warranty. Possessing the necessary know-how is essential.

HOW TO REPLACE VENTILATOR
1. Unscrew the two PH2 screws on the back of the lid.

missing alt textmissing alt text


2. Slide the top panel to the rear of the appliance, whilst lifting to release the top panel.

missing alt text



3. Unscrew the four 7mm screws on the heating element air duct.

missing alt text


4. Using a flat blade screwdriver carefully prise the heating element air duct away from the crossbar.

missing alt textmissing alt text



5. Use a flat blade screwdriver to prise the heating element air duct away from the dryer fan.

missing alt text


6. Unscrew the 8mm screw holding the ventilator to the body of the washing machine.

missing alt text



7. Lift the ventilator out of the appliance and away from the condenser duct. NOTE: Ensure that the ventilator is fully connected during installation (there may be a 7mm jubilee clip holding the hose to the ventilator).

missing alt text


8. Carefully disconnect wiring connectors from the fan motor spades. (Note: Take a photo of the wiring positioning/location before disconnecting) Be careful not to damage the connectors.

missing alt text



9. Unhook the fan belt from the ventilator and fan motor.

missing alt textmissing alt text


10. Unscrew the three 8mm screws for the fan motor to release and remove from the ventilator.

missing alt text



11. Carefully remove the gasket from the ventilator.

missing alt text


12. When assembling, repeat steps in reverse order.

Questo articolo è stato utile?